Bridgestone Blizzak LM-60 RFT
Blizzak LM-60 RFT
Bridgestone Blizzak LM-60 RFT
Blizzak LM-60 RFT
DOT QUALITY GRADES All passenger car tires must conform to Federal Safety Requirements in addition to these grades.
TREADWEAR The treadwear grade is a comparative grade assigned by the manufacturer based on the wear rate of a tire when tested under controlled conditions on a course that meets government-specified requirements. For example, a tire graded 150 would wear one and a half (1 1/2) times as well as a tire graded 100 under the controlled test conditions. The relative performance of tires depends upon the actual conditions of their use and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics.
TRACTION AA, A, B, C The traction grade is based on wet skid tests of a tire on government-specified concrete and asphalt surfaces. The traction grade is based on a straight-ahead wet braking traction test and does not include a cornering traction test. The comparative tire grade letters, AA, A, B, and C (AA being the highest and C being the lowest) represent the tire's ability to stop the vehicle on wet pavement under the controlled test conditions. Ice and snow traction capabilities are not tested.
WARNING: The traction grade assigned is based on braking (straight ahead) traction test and does not include cornering (turning) traction.
TEMPERATURE A, B, C The temperature grade is based on an indoor, high-speed test that meets government-specified requirements. The comparative grade letters, A, B, and C (A being the highest and C being the lowest) represent the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades A and B represent higher levels of performance on the laboratory test wheel than the minimum required by law.
WARNING:The temperature grade is established for a tire that is properly inflated and not overloaded. Excessive speed, under inflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
EXAMPLE #1: A tire with the ratings of TREADWEAR 80, TRACTION B, TEMPERATURE C, is interpreted by the manufacturer as having:
- TREADWEAR grade less than that of a tire graded 100.
- TRACTION capability greater than tires of C grade, but not as good as tires of AA or A grade.
- TEMPERATURE performance on the laboratory high-speed test greater than required by the government standards, but less than tires graded B or A.
- TREADWEAR is graded two times better than the tire in example #1.
- Wet TRACTION and TEMPERATURE are better than the tire in example #1.
- UTQG grades are not government grades. They are manufacturer grades that are not based on head-to-head interbrand testing. Test data is not typically submitted to the National Highway Traffic Safety Administration.
- Treadwear grades are not a guarantee for a given mileage warranty, or an indicator of overall tire quality. Treadwear grades are assigned by the manufacturer for comparison purposes within the same brand names and construction types only.
- UTQG grades are not safety ratings. Overall tire quality and safety are not graded. Tire selection based on any one, two, or even three UTQG ratings may not satisfy your needs.
- One brand name of tires cannot be considered superior or inferior to another brand name of tires based solely on UTQG grades.
- UTQG grades are not required for snow tires, light truck tires and maximum traction tires.
- UTQG is used but not required in Canada.
Features & Benefits
Support the weight of the vehicle and passenger even with a loss of air pressure with thicker sidewall, generally designed for RFT tires, made of special heat-resistant rubber
Enhances snow traction and water evacuation.
Zig Zag Sipes
Provides an upgrade to traction on snow and ice.
Silica-based tread compound
Provides outstanding wet performance.
L.L. Carbon (Long Link)
Helps improve tread wear and resist cracking, chipping and tearing through the use of a special long length carbon structure
Circumferential tread grooves
Evacuates and channels water efficiently to help reduce hydroplaning and to improve wet traction
Winter Tread Design
Delivers safety and control in snow, ice, and cold weather conditions and marked on at least one sidewall with the letters "M" and "S" plus a pictograph of a mountain with a snowflake inside it.
Improves uniformity and ride comfort through use of a single continuous strand of cable in the bead construction
CO-CS (Computer Optimized Component System)
Maximizes tire performance by optimizing the appropriate combination of tread design, casing shape, materials, and construction.
Enhance dry performance while maintaining snow, ice and wet traction.
All warranties are limited to original purchaser on originally installed vehicle. See each warranty at your nearest Firestone Complete Auto Care Store for details and restrictions.
*When you purchase four tires **Price dependent on tire size and geographical location.